Wood Blinds
1” and 2” Slats

Visible variations in color, grain, and texture are natural characteristics of wood.

Sunrise Premium Basswood Blinds are made from 100% kiln dried Basswood.

General Specification Information – Applies to all wood product lines

  • Slats, valance, bottomrail, cord tassels, and plugs are color coordinated to match with finished ends.
  • Minimum width for single blind is 8” net width.  Blinds made with a net width less than 9.5" are subject to a $15 surcharge and are not covered by our warranty.
  • Maximum width for single blind is 96” net width. Consult your price list for warranty specifications on larger blinds. Single blinds in the area right of the double line are not covered by warranty.
  • Mounting hardware is included. Mounting brackets are hinged, open boxes that can mount from the side, top or back of the window. Hold downs, spacer blocks and extensions brackets are included upon request.
  • Inside mount blinds – headrail and slats made 0.5” smaller than width ordered.
  • Outside mount blinds – headrail and slats made to exact width ordered.
  • Headrail size and choices varies by product. See specific product information listed below.
  • Standard IB valance is 0.375” larger than the headrail or 0.125” less than the ordered width.
  • Standard OB valance size varies by product. See specific product information listed below. All valance measurements will be the widest point on the face of the valance.
  • Wand tilter is a clutch-type, dies-cast helical gear driven by a one piece die-cast worm gear in a polymer housing.
  • Cord tilter is a drum type, helical gear driven by a worm enclosed casing.
  • Wands are color coordinated to match slats up to 60”. Clear lucite wands are available in 54” and 72” upon request. White blinds have PVC wands, stained blinds have wood wands.
  • Tapes drums are heavy duty nylon plastic.
  • Tilt rod is solid steel with a corrosion-resistant finish.
  • Lift Cord is polyester. Ladder, tapes, and cord designed to meet or exceed commercial item specification No. 1029-86.
  • Cord and End Lock is steel with zinc coating.
2” Blinds
  • Available in Smooth Premium Basswood.
  • 2” x 2.25” Standard Headrail. 
  • Available with wand or cord tilter.
  • 3” Sculpted Valance is included at no extra charge on Premium Basswood Blinds.
  • The face of a standard OB valance will be 1.5” larger than the headrail width. Returns will be 2.875”, mitre-cut and glued to the face of the valance. All valance measurements are from the widest point on the face of the valance.
  • Available with 34colors of Decorative Cloth Tape – 10% surcharge for Standard Twill Cloth Tape Colors; 20% surcharge for Deluxe Decorative Cloth Tape Colors. Blinds will be entered with normal string ladders unless otherwise specified.
  • Available with Routeless Construction. Standard Headrail only. See your price chart for surcharge.
  • Available with RollEase Continuous Cord Lift System. Standard Headrail only. See your price chart for surcharge.
  • Available with a Battery-Operated Tilt System up to 80 sq. ft. for white basswood. See your price chart for surcharge.
1” Blinds
  • Available in Basswood only.
  • Standard Headrail is 1” x 1.5” and corrosion resistant.
  • The face of a standard OB valance will be 1.5” larger than the headrail width. Returns will be 2.25”, mitre-cut and glued to the face of the valance. All valance measurements are from the widest point on the face of the valance.
  • Consult your price list for warranty specifications on larger blinds. Single blinds in the area right of the double line are not covered by warranty at any time after ship date. We recommend that 1” blinds be made no wider than 36”.
  • Decorative Cloth Tape is not available.
  • Routeless Construction is not available.
  • RollEase Continuous Cord Lift System is not available.
  • Battery-Operated Tilt System is not available.

 

Close window