Natural Woven Wood Shades

Visible variations in color, grain and texture are natural characteristics of this product.

Woven Wood Shades are made from wood, bamboo and rattan with painted & stained finished. Some designs have natural jute, grass & reeds. Variation in color, grain, texture and warpage are natural and should not be considered to be defective.

Over time, the color will soften in the sun to a mild golden tone. Finish edges of the bamboo and large reed may crack after cutting and assembly due to the inherent property of natural material. We recommend that multiple shade orders of the same pattern be placed at one time.

Woven wood, as any woven fabric, can be affected by temperature and humidity, which could stretch or shrink the material. Shipping and handling may also cause a slight change in shade length. These variations are considered normal and are not covered by warranty.

Woven Wood Shades are available 34 total colors and styles in 5 price categories:

• Series 100 - Available in 8 Colors and Styles
• Series 200 - Available in 5 Colors and Styles
• Series 300 - Available in 7 Colors and Styles
• Series 400 - Available in 5 Colors and Styles
• Series 500 - Available in 9 Colors and Styles

General Specification Information - Applies to all series.

• Shades are made in the Roman Fold Style, see fold chart below.
• Minimum width for single shade is 12" net width.
• Maximum width for single shade is 96" net width.
• Maximum width for 2on1 or 3on1 shades is 120" net width. Order must include individual shade widths that add to the total headrail width.
• Minimum drop is 12".
• Maximum drop is 192".
• Mounting hardware is included. Mounting hardware is available as inside mount brackets, New York brackets (outside mount), and extension brackets. Hold downs, spacer blocks, and cord cleats are available upon request.
• Inside mount blinds - headrail and slats made 0.5" small than width ordered.
• Outside mount blinds - headrail and slats made to exact width ordered.
• Headrail is made from premium wood and measure 1.5" x 0.625". Minimum depth requirements - 1". Depth required for flush mount - 2".
• Shade is attached to the back of the headrail. The valance is attached to the top of the headrail and drapes over the front, covering the control mechanisms.
• Standard valance drop is 7". Longer valances are available for a surcharge. Side Caps are sent at no charge with outside mount shades or upon request.
• Color coordinated wood tassels, see chart below.
• Control mechanisms are stainless steel swivel cord lock & guided pulley.
• All available with the RollEase Continuous Loop System, Duofold Lift System, Decorative Edge Binding, and Privacy or Blackout Liners.
• Stacking Formula (Approximate): Add 4" for headrail plus 1" for every 12" of shade drop.